m1r powerGrip M10 x 140 / 60/80

The powerGrip Throughbolt for highest performance in cracked concrete
European Technical Assessment Option 1 for cracked and non-cracked concrete
Resistance under fire exposure F120 is part of the assessment
The anchor may also be used under seismic influence for performance category C1
Reduced setting depths for a faster installation
Innovative clip design; higher loads and best expansion
With a big DIN 9021 washer for fixings with slotted holes and for wooden structures
Setting depth mark for correct installation
Small edge and spacing distances
Simple setting process due to low resistance to impacts
Fast achievement of installation torque
Stainless steel A4/316
Pre installation or through fixing
Indoor and outdoor applications

Specifications
Sales data
Plug and drill Ø mm	dnom = d0	10
Length mm	L	140
Drilling depth / reduced setting depth mm	h0 / h0.red	80/60
Length of screw in building material / reduced setting depth mm	hnom / hnom.red	70/50
Usable length / reduced setting depth mm	tfix / tfix.red	60/80
Effective anchorage depth / reduced setting depth mm	hef / hef.red	60/40
Clearance hole in fixture mm	df	12
Code of usable length		N
Packaging
Box content		50
FS		FS51
Outer carton		150
SK		SK22
Quantity per pallet		9000
Technical Data
Non-cracked concrete C20/25 tension load (kN)		9.5
Cracked concrete C20/25 tension load (kN)		4.3
Concrete C20/25 shear load (kN)		7.8
Bending moment (Nm)		32
Min. distance betw. anchors/at edge distance mm	smin/c	80/65
Min. edge distance/at distance betw. anchors mm	cmin/s	65/80
Minimum thickness of concrete member mm	hmin	120
Installation torque (Nm)	Tinst	45
Wrench size	SW	17
Additional information
Product abbreviation		m1r powerGrip
Customs tariff number		73181991011
Preference		YES
Country of origin		CH
Dimension		m1r powerGrip M10 x 140 / 60/80
Weight		0.0868
EAN-Code
EAN-Code FS		7610634187300
EAN-Code		7610634187737
_____________
The partial safety factors of the resistances as well as a partial safety factor of the load of γF = 1.4 are considered The technical data is only valid for single fixings without consideration of edge and anchor distances Loads do not apply for reduced setting depths 1 kN ≈ 100 kg