MVAr-Set M12 x 160
Resin Capsule, Epoxy-Acrylate with Anchor Rod, stainless steel A4-70/316 with hex-nut and washer DIN 125A
Article code
1621622
MVAr-Set M12 x 160 is available to buy in increments of 10
- European Technical Assessment Option 8 for non-cracked concrete
- The European Technical Assessment for the MVA resin capsule only applies in combination with the MVA-S/MVA-Sr anchor rods
- Quick and simple installation
- Small edge and spacing distances
- Temperature range short term: -40°C - +80°C
- Temperature range long term: -40°C - +50°C
- Anchor rod with 45° end
- Setting depth mark for correct installation
- Indoor (zinc plated) and outdoor (stainless steel) applications
Sales data | ||
---|---|---|
Thread | d | M12 |
Thread length mm | LG | 160 |
Drilling hole Ø mm | d0 | 14 |
Drilling depth mm | h0 | 110 |
Usable length mm | tfix | 30 |
Hex-nut | SW | 19 |
Drive | SW | 8 |
Packaging | ||
Box content | 10 | |
Technical Data | ||
Non-cracked concrete C20/25 tension load (kN) galv. 5.8 | 16 | |
Non-cracked concrete C20/25 tension load (kN) A4-70 | 16 | |
Non-cracked concrete C20/25 tension load (kN) MVA-I/MVA-Ir | 10,3 | |
Non-cracked concrete C20/25 shear load (kN) galv. 5.8 | 12 | |
Non-cracked concrete C20/25 shear load (kN) A4-70 | 13 | |
Bending moment (Nm) galv. 5.8 | 37,1 | |
Bending moment (Nm) A4-70 | 42,1 | |
Min. distance betw. anchors mm | smin | 55 |
Min. edge distance mm | cmin | 55 |
Minimum thickness of concrete member mm | hmin | 140 |
Installation torque (Nm) | Tinst | 40 |
Wrench size | SW | 19 |
Additional information | ||
Product abbreviation | MVAr-Set | |
Customs tariff number | 35069180000 | |
Preference | NO | |
Country of origin | NL | |
Dimension | MVAr-Set M12 x 160 | |
Weight | 0.1615 | |
_____________ | ||
|
||
|
-
Applications
- steel constructions
- cable trays
- guard rails
- substructures
- machines